Z-TRAK® Custom-Fitted Mounting Rack for Truck Beds
30-Day Test-Fit Promise Free Shipping on Orders $100+ 2025 SEMA Media Choice Award
Mounting
Select Custom Mount for Toolboxes, custom beds, and other non-standard setups.
Custom Rail Measurements — Required Fields
Measurement diagram coming soon
If you have a flat mounting area, enter 0 for the offset depth or check out our High Strength E-TRAK.
Not sure how to measure? Check out our Z-TRAK Sizing Guide →
- Free U.S. shipping over $100
- 30-Day Test-Fit Returns
- Limited Lifetime Warranty
- Made in the USA
Z-TRAK™ – Custom-Fitted Mounting Rack for Truck Beds
The patented, heavy-duty tie-down system engineered for your truck.
Z-TRAK™ is custom-fitted to the exact contours of your truck bed. No loose fit, no guesswork, no compromise in strength. It's laser-cut from 12-gauge American steel and works with E-Track fittings and hundreds of other tie-down accessories. Dirt bikes, tools, camping gear, weekend projects: That Ain't Goin' Nowhere.
✅ Custom-fit for your truck
✅ Works with hundreds of existing accessories
✅ Proudly made in the USA
✅ Fast, easy DIY install with no rails to line up
✅ Built to last a lifetime
Fitment & Ordering
What's Included
Installation
Product Specifications
| Weight | |
|---|---|
| Length | |
| Material | |
| Finish | |
| Hardware | |
| Made In |
Shipping & Returns
Free U.S. shipping on orders over $100.
Every Z-TRAK is covered by our 30-Day Test-Fit Promise: test-fit it before you install, and if it doesn't work, we'll exchange it or take it back. A 20% restocking fee covers shipping both ways. If our fit selector or our shipping was wrong, we cover everything. Installed items can't be returned.
How It Works
One rail. Clip in whatever you haul.
Mount the rail
Pick your truck and we cut the rail to fit your bed. It mounts to the front bulkhead with self-tapping screws in about 10 minutes. For the strongest, factory-grade install, add the Plus Nut Kit (1 to 2 hour install). It's a must for aluminum or composite beds.
Clip in what you haul
Moto-Choks, Bike Choks, O-Rings and Clip Rings clip anywhere along the rail. Any E-Track accessory works too.
Strap down and go
Anchor bikes, coolers, generators or gear right where they sit. Unclip everything when you need the whole bed back.
Z-TRAK Rail Questions
How does it install?
The standard install uses self-tapping screws into your front bulkhead and takes about 10 minutes with a drill and a 5/16 in. socket. For aluminum or composite beds, use the Plus Nut Kit. It installs from the front side in 1 to 2 hours. Full install instructions.
Will it fit my truck?
Every rail is cut for a specific truck bed. Use the Select Your Truck bar at the top of the page and we'll confirm the right rail before you buy. Truck not listed? It's most likely compatible. Contact us and we'll match it for you. You need clear access to the front bulkhead, so a toolbox that covers it would block the install.
Does it work with E-Track accessories?
Yes. Z-TRAK uses E-Track slots, so most E-Track accessories clip right in. We build Z-TRAK to tighter tolerances than standard E-Track, so a few off-spec imported parts won't fit. For the best fit, use Z-TRAK accessories.
How much weight will it hold?
Our Z-TRAK® and High Strength E-TRAK rails are rated up to 2,000 lb. Real-world installed capacity depends on your truck, the mounting surface, and how it's mounted. For heavy loads or winching, we recommend the Plus Nut Kit.
Can I still use my truck bed?
Yes. Z-TRAK mounts on the front bulkhead, not the floor. Unclip the Choks and anchors and the whole bed is open.
Can I use it for winching?
Yes, with the right install. If you're going to winch, we strongly recommend installing with our Plus Nut Kit, or another rivet nut or nutsert install, instead of self-tapping screws alone. Pair it with the Headache Rack as your winch mount, and always follow safe winching practices.
What if it doesn't work for me?
Every order is covered by our 30-day Test-Fit Promise: unbox it and test-fit it before you install, and if it doesn't work, we'll exchange it or take it back. A 20% restocking fee covers shipping both ways. If our fit selector or our shipping was wrong, we cover everything. Installed items can't be returned. Every rail also carries a Limited Lifetime Warranty and is made in the USA from 12-gauge American steel.
100 Uses For Z-TRAK™
Picking up a grill? Hauling dirt bikes? Going camping? Whatever you're up to, Z-TRAK™ is here to secure your load easier and more securely than ever before.
Built For Motos
Z-TRAK™ is perfect for dirtbikes, e-bikes, motorcycles, adv bikes, and more! Our system allows you to securely fit up to 3 full-size bikes in one truck bed.
Check out our family of Moto-Choks™ and accessories below.
Z-TRAK Accessories
Browse our most popular accessories built just for Z-TRAK.
